|
|
Click For Larger Photo |
SIMone Childbirth Birthing Simulator/Manikin
|
SIMONE Childbirth Birthing Simulator $49.500.00 |
|
|
SIMone State of The Art Childbirth Simulator Simulate
High Stress Situations with the SIMone™
Childbirth
Birthing Simulator!
Using patented haptic response technology, SIMone™ gives
you a unique training experience. The level of realism is
additionally heightened through a specially developed visual and
audio interface.
The monitoring software provides information on the progress of the
birth and allows training in intervention both through the use of
medication and the use of vacuum or forceps to complete a delivery.
The force feedback mechanism allows the trainee to learn the haptic
skills necessary to give confidence when performing these
procedures.
The birth simulator, SIMone™, is a
model of a female abdomen with a vulva and the spina ischiadica as
landmarks. Inside the simulator is a fetal head with the sagittal
suture and fontanelle for determining the position and approach of
the head. The 19" flat screen monitor with an easy to use
touchscreen, displays an exact image of the position and rotation of
the fetal head within the maternal pelvis.
A variety of delivery scenarios are presented
in the application software for model based training. The
cardiotocograph and partogram support the assessment and progress of
the delivery scenario. The administration of medication or
amniotomy are interventions that may be used in order to achieve the
necessary progress during the delivery.
In addition to learning the necessary haptic skills, the SIMone™.
SIMone™ gives the opportunity to practice an
instrumental delivery in a realistic manner - over and over again
with little or no set up time! In fact it takes less than 60 seconds
to commence a new birthing scenario.
SIMone
Birthing Simulator trains the student in:
|
Simone Childbirth Simulator Features:
- Recognizing the right moment to select/suggest a
vaginal assisted delivery
- the correct handling of medical instruments for
instrumental delivery (forceps or vacuum)
- Assessing the position of the fetal head in relation
to the maternal pelvis
- Labor management using a partogram
- The administration of medication to achieve the
necessary progress during the delivery
- Interpreting fetal heartbeat and contraction of the
uterus through use of CTG
- Interpreting respiratory sounds
- Interpreting the sounds of pain experienced by the
mother
Accessories Incuded:
- 1 Vacuum extractor Menox 60mm
- 1 Vacuum hand pump
- 1 Naegele forceps
- Latex Disposable Gloves, Size: M/L
- 2 Replacement Genital Inserts
- Assembly tool
- Operating Manual
- 200 ml lubricant
-
Weight: 189
kg/416.7 lb
Length: 200 cm/ 78.74 in
Width: 100 cm/39.37 in
Height: 175 cm/68.9 in
Voltage: 110-240 V
Frequency: 50-60
Hz.Disclosure:
Attend 2 days
training workshop is a MUST FOR
BUYER'S REPRESENTATIVE. This is
a necessary condition for
purchasing this state-of-the-art
Child Birth
Simulator-Manikin. Workshop
schedule will be available after
order is placed. Workshop
conducted on company's premises.
4 YEARS MANUFACTURER'S WARRANTY!
|
|
|
Click For Larger Photo
See More View
|
Gynecological Training Simulator
|
$1299.00 |
|
|
One of our most popular Gynecological Simulator! The
Full -Size Female adult lower body gives students and educators a graphic experience in vaginal speculum examination, bi-manual pelvic examination, IUD insertion techniques, diaphragm sizing and fitting, uterine sounding, and viewing of normal and abnormal cervices.
|
Features
- Realistically sculpted and anatomically accurate Ovaries and Fimbriae
Uterus and Cervix feature patented "screw" design for fast and easy change-out.
- Full size female adult lower body with removable soft outer skin
- One normal anteverted uterus with transparent top and round ligaments
- Seven uteri with one normal "control" uterus and six with external uterine abnormalities
- Two normal cervices with patent os for IUD insertion/removal
- Uterus and cervix feature patented "screw" design for fast and easy change-out
- Contraceptive sponge insertion and removal
- Female condom insertion and removal
- Diaphragm and cervical cap insertion and removal
- Six cervices with cervical abnormalities
- Anatomically accurate fimbriae and ovaries
- Interchangeable Uteri with normal and abnormal
external pathologies
- Viewing of cervical pathology
- Talcum powder
- Instruction manual
- Soft nylon carrying bag
|
|
|
See Model Larger View
See Features View
Accessing Fallopian Tubes
Interchangeable Uteri
Normal & Abnormal Cervices
Early Pregnancy Uteri
Interchangeable Introitus
Insertion Of IUD
See Accessories View
See More Features
|
Gynecological Examination Training Simulator
|
$1289.00 |
|
|
This one unique Gynecological Examination Simulator Model is realistically sculptured, anatomically correct and accurate. Designed by physicians for physicians and Healthcare providers.
Simulator represents a Female adult lower body with relevant
internal anatomical landmarks and anatomically accurate Fimbriae and
Ovaries. The Gynecologic Examination Simulator combines and delivers the ability to demonstrate multiple gynecologic procedures as well as practice Laparoscopic Examination and Minilaparotomy
as well as recognition of pathologies and placing of contraceptive
devices can be trained.
|
Features
- Full-size adult Female lower torso with relevant internal anatomic landmarks
- Bi-manual Pelvic examination
- Palpation of normal and pregnant uteri
- Vaginal examination (including insertion of speculum)
- Visual recognition of normal and abnormal cervices
- Uterine sounding
- IUD insertion and removal
- Contraceptive sponge insertion and removal
- Female condom insertion and removal
- Diaphragm and Cervical cap sizing & fitting, insertion and removal
- Laparoscopic visualization and occlusion of Fallopian Tubes
- Minilaparotomy
- Realistically sculpted and anatomically accurate Ovaries and Fimbriae
- Uterus and Cervix feature patented "screw" design for fast and easy change-out
Accessories:
- 1 Female Torso
- 1 MVA kit
- 2 Thin locking ring (extra)
- 2 Pegs (extra)
- 1 Normal Cervix (painted)
- 1 Cervix with proliferation of Columnar Epithelium (Ectropion)
- 1 Cervix with inclusion (Nabothian Cyst and Endoservical Polyp)
- 1 Cervix with lesion (Cancer)
- 2ea. Normal Tubal Fimbriae and Ovaries
- 1 Flashlight with Battery
- 1 normal Anteverted Uterus
- 1 Retroverted Parous Uterus
- 1 10-week pregnant uterus
- 1 Postpartum Uterus (20 week size with fallopian tubes)
- 5 normal Cervices with patent OS for IUD insertion/removal
- 4 Abnormal Cervices
- 10 Fallopian Tubes
- Realistically sculpted and anatomically accurate Ovaries and Fimbriae
- Uterus and Cervix feature patented "screw" design for fast and easy change-out
- Simulator comes with talcum powder
- K-Y Jelly
- Instruction manual
- Soft nylon carrying bag
Weight: 30Lbs.
|
|
|
Click For Larger Photo
See More View
|
Hysteroscopy Training Examination Simulator
|
$1388.00 |
|
|
The most realistic Hysteroscopy Simulator available! A full size female adult lower torso with a foam-backed soft outer skin simulates the feel of the anterior pelvic wall.
|
Features
- Full size female adult lower torso with removable soft outer skin.
- Seven uteri including normal "control" uterus with healthy internal and external appearance
- Internal anatomic artwork of normal and abnormal uteri
- Internal representation of endometrial polyposis, fibroids, early and advanced carcinoma of the endometrium, torsion of sloughing fibroid, and carcinoma of the fundus
- External representation of normal and abnormal uteri
- Palpation of normal and abnormal uteri
- Normal cervix and interchangeable uteri with patented "screw" design
- Soft Nylon Carrying Bag
- Instruction Manual
|
|
|
Click For Larger Photo |
Gynecological Diagnostic Training Manikin
|
$1298.00 |
|
|
A lifelike
Gynecological Manikin- Simulator, Female Pelvis for developing
diagnostic skills in gynecologic procedures, anatomical instruction,
abdominal palpation, and speculum instruction. Gynecological Manikin allows: the
comprehensive, stress free Introduction of Gynecological
Examinations, or more Advanced Tactile Comparisons of Pelvic
Pathologic Conditions in a Classroom Setting easing the way into Clinical
Experience. Constructed of soft, easily cleaned, vinyl
materials that approximate skin texture, provides detailed,
life-like Anatomical Features and references. Included are the
following interchangeable inserts: normal cervix for IUD insertion
and removal, normal parous cervix, cervix with endocervical polyp,
cervix with ectropian characteristics, cervix with neoplasia
(carcinoma), normal uterus for IUD insertion and removal, pregnant
10-week uterus, and two adnexal masses. Does not include ovaries.
Manikin comes with instruction sheet and soft nylon bag.
|
Accessories Included:
- Normal
Cervix for IUD insertion and removal
- Normal
Parous Cervix
- Cervix
with Endocervical Polyp
- Cervix
with Ectropian characteristics
- Cervix
with Neoplasia (carcinoma)
- Normal
Uterus for IUD insertion and removal
-
Pregnant 10-week Uterus
- Two
Adnexal Masses.
- Instruction manual
- Carrying bag
Size: 13" x
13" x 12"
|
|
|
Click For Larger Photo
More large View
Inflatable Bladder
Shoulder Deliver
Massage Fetus
Breech Delivery
Reusable Episiotomy
Articulaing Fetus
Dilating Cervix Vaginal Exam
Vacuum Augmentation
Palpation Module
Fetus Delivery Photos
|
Obstetric Universal Simulator Childbirth
|
$1580.00 |
|
Use of Obstetric Simulator will
demonstrate the following:
- Normal or breech deliveries
- Leopold maneuvers
- Intrauterine manipulation
- Cord prolapse
- Placenta previa
- Fundal massage
- Postpartum care
|
Features
- Normal or breech delivery
- Demonstrate internal rotation, expulsion and
external rotation
- Inflatable cushion lifts fetus for Leopold maneuver
- Practice intrauterine manipulation to convert
breech, or transverse to vertex delivery
- Adaptive birth canal to demonstrate dystocia and
deal with its relief
- Three dilating cervices
- One Articulated Baby for “version” exercises
- One padded stomach cover
- Three vulval inserts
- Two placentas
- Three umbilical cords
- Silicone lube and talcum powder
- Instruction manual
- Carrying bag
Palpation for Leopold Maneuvers:
- Place fetus in vertex, transverse, or breech position
- Lower cushion raises fetus for palpation
- Soft stomach cover facilitates palpation or fetal
manipulation
Normal Vaginal Delivery:
- Birth from ROA or LOP positions
- Demonstrate rotation and expulsion
- Cervix dilates as labor progresses
- Position placenta to simulate placenta previa
- Practice reduction of nucal cord
Breech and Vacuum Delivery:
- Place fetus on birthing mechanism in normal or breech
position
- Teach Pinard “leg flip” during breech
- Pause normal delivery to create need for vacuum
augmentation
Postpartum Activity:
- Practice fundal massage to firm a “boggy” uterus
- Modules feature medical episiotomy with tears in the
labia minora, mediolateral tears, and standard
medialateral episiotomy
Accessories:
- Three dilating cervices
- One Articulated Baby for “version” exercises
- One padded stomach cover
- Three vulval inserts
- Two placentas
- Three umbilical cords
- Silicone lube and talcum powder
- Instruction manual
- Carrying bag
|
|
|
See Whole Manikin & Torso View
Manikin With 2 Babies Features
Manikin With 2 Babies
Birth View 1
Birth View 2
Birth View 3
Torso With 1 Baby |
Maternal & Neonatal Birth
Obstetric Training Simulators
Whole Manikin Or Torso
Noelle Simulator
|
$3695.00 GR-S550 Manikin 2 Babies
$3295.00 GR-S551 Manikin 1
Baby
$2295.00 GR-S552 Torso 1 Baby |
|
|
This Noelle Simulator - complete Childbirth Simulators have been part of Maternal and Child health programs for more than 40 years. This comprehensive
teaching system combines the best of our patient care simulators with the Advanced Childbirth Simulator. It is designed to provide a complete birthing experience before, during, and after delivery.
Resuscitation baby has intubatable airway and patent umbilical vein Three
Vulval inserts for postpartum suturing training. Extensible dilating cervix permits students to conduct vaginal exams and record results.
|
Features for Models: GR-S550, GR-S551,
GR-S552
- Female Full-size body articulating -- GR-S550
- Female Full-size body articulating --
GR-S551
- Female Full size Torso Upper & Lower --
GR-S552
- Intubatable airway with
chest rise ---- GR-S550, GR-S551
- IV arm for meds/fluids
---------------- GR-S550, GR-S551
- Multiple fetal heart sounds
------------ GR-S550, GR-S551
- Removable stomach cover ------- all models
- Practice Leopold Maneuvers ----- all models
- Four umbilical cords -------------- all models
- Two umbilical clamps ------------- all models
- Automatic birthing system: rotates the baby when moves through birth canal
----- all models
- Measure head descent and cervical dilation -----
all models
- Multiple placenta locations ----------------------
all models
- Dilating cervices ---------------------------------
all models
- Three Vulva for postpartum suturing--------------
all models
- Practice postpartum suturing on vulval inserts ---
all models
- Talcum powder, water soluble silicone lubricant --
all models
- Instruction Training Manual
----------------------- all models
- Carrying Bag -------------------------------------- all models
-
Model GR-S550 Include two Babies:
Resuscitation Baby And Birthing Articulated Baby with Umbilical Cord
& Placenta.
- Models GR-S551, GR-S552 Include:
One Birthing Articulated Baby & Umbilical Cord & Placenta
- Weight:
95lb --- GR-S551,
99lb --- GR-S550
|
|
|
Click For Larger Photo
Click Fetus delivery Photo
Cervix Vaginal Dilation Module Photo |
Advanced Child Birth Simulator,
Cervix Vaginal Module (optional)
|
Advanced Child Birth $1457.00 |
|
|
Cervix Vaginal Dilation
Module $459.00
|
|
|
This Childbirth Simulator Model is an excellent training model for medical students to build confidence in and practice in
Childbirth. This versatile Childbirth Simulator
is used worldwide by Healthcare Educators. It not only provides
an excellent simulation of the Normal Delivery Experience for
the student and educator, but also provides Instruction in
Abnormal and Multiple Deliveries. Used in
Medical Schools and Doctor Offices, Legal Presentations.
Cervix Vaginal Dilation Modules
(sold as optional) can be Inserted into the Advanced
Childbirth Simulator. Five Labor Stations, Selected to
represent conditions of the Cervix and Vagina prior to labor,
during labor, and at Birth in a Primigravid Woman Stations
may be placed in Birth Canal of Advanced Childbirth Simulator.
Stations illustrated are: STA -5 prior to onset of
labor; STA -4 cervix Partially Effaced; STA -3 cervix Fully
Effaced; STA 0 fetal head at plane of ischial spine: STA +2
Cervix Nearing Full; dilation; STA +5 crowning of Fetal Head
Labor Delivery Module is designed to be used as a series
of models that can be: a) Passed around a classroom to compare
the condition of Cervix as labor progress.
|
Demonstrate Obstetrical Procedures:
- Fetal palpation
- Normal Vaginal delivery
- Complete, frank, and footling breech
birth
- C-section delivery
- Ritgen's maneuver
- Episiotomy
- Vertex presentation
- Intrauterine manipulation
- Vertex/vertex, vertex/breech,
breech/vertex, or breech/breech presentation in
multiple birth
- Prolapse of umbilical cord
- Demonstration of placenta previa:
total, partial, and marginal
- Normal delivery of umbilical cord
and placenta
- Palpation of fetal fontanelles
- Simulated Suction of Nose And Mouth
Features:
- Removable diaphragm cover
- Removable stomach cover for manual positioning of Fetus
- Life-size pelvic cavity with all major anatomical landmarks and a hand-painted outline of the bony pelvis
- Ultra-soft vulval insert for episiotomy exercises
- Simulated dorsosacral position for realistic delivery technique
- Hand-painted outline of the bony pelvis
- Forceps can be used during simulation
- All parts in this simulator are replaceable
- Includes two fetal babies and placentas
- Spare stomach cover
- Two spare vulval inserts
- Two spare umbilical cords
- Carrying Bag
|
|
|
Simulator Larger Photo
ChildBirth Larger Photo |
Obstetric Simulator Universal
Techniques & Procedures Childbirth
| $1399.00 |
|
|
For realistic practice of delivery techniques
this Anatomically Correct Pelvic Model Simulator with full term
newborn and placenta to give your trainees realistic practice in
multiple techniques, and to learn the procedure for emergency
childbirth.
It comes with: disposable umbilical cords, clamps, easily
replaceable spare vulva, powder to make simulated blood, a modular
pregnant belly overlay, and a clear abdominal overlay. The modular
overlay has a self-contained fetus for practicing the Leopold’s
maneuver.
The lifelike pelvic cavity has pronounced pelvic
landmarks.
Included are:
spinal column, angled birth canal, ileum, ischium, sacrum, sacro spinious ligaments, and greater sciatic
notch. The fetus provided is of a realistic newborn size with
fontanels and cranial sutures. This
Obstetric Simulator/Manikin with Fetus and Placenta to give students experience with
multiple techniques and procedures for Childbirth.
Includes
disposable Umbilical Cord with Clamps, extra Vulva, Pregnant Belly
overlay, clear Abdominal Overlay, simulated Blood Powder, and a
Carry Bag. Latex Free
|
Accessories:
- Disposable Umbilical Cord with Clamps
- Extra Vulva
- Pregnant Belly Overlay
- Clear Abdominal Overlay
- Simulated Blood Powder
- Carry Bag.
- Simulator Pelvic
|
|
|
Simulator Larger Photo
More Childbirth View
|
Childbirth Simulator
| $1799.00 |
|
|
A perfect anatomical model and birthing simulator
to teach and practice diagnostic and therapeutic manipulation before
and during childbirth. This human birth model features a female
pelvis with covered belly cavity, removable vulva and a fetus. An
anatomical accurate and realistic model of human birth. Birthing
simulator delivered on baseboard.
|
|
Simulator Larger Photo
Palpation Larger View
|
Leopold's Maneuvers,
Palpation Skills Fetus View
| $778.00 |
|
|
This 3D Model allows advantage in
teaching Health Professionals and Students is the ability to:
Perform Leopold's Maneuvers and provide
immediate visualization of the fetus after demonstration of the
Palpation Skills. This unique three-dimensional model is used to
demonstrate Palpation of the Abdomen to determine Fetal Lie,
Presentation, and Position. The model includes a Fetus with a
weighted body, movable arms and legs, firm buttocks, and a head with
palpable anterior and posterior fontanels. The Fetal Body flexes to
let you demonstrate all presentations and positions. The Fetus and
vinyl pelvis rest within the abdominal portion of the model. The
abdomen, a padded cloth attached by Velcro to the base, allows easy
removal and replacement in order to visualize and change fetal
positions. Movable gel packs are included to simulate
amniotic fluid. A practice/resource guide is included to provide
detailed suggestions on how to use this model with nurses,
nurse-midwives, healthcare providers, students, and expectant
parents.
Size: 20" x 12" x 10"
|
Features:
- Includes a Fetus with a
weighted body
- Movable Arms Legs
- Firm Buttocks and a
Head
- Palpable Anterior and
Posterior Fontanels.
- Fetal Body Flexes to
demonstrate all presentations and positions.
- Fetus and Vinyl
Pelvis rest within the Abdominal portion of the Model.
- Abdomen attached by
Velcro to the base
- Allows easy removal
and replacement in order to visualize and change Fetal
positions.
|
|
|
Not sold separately. Sold only with Advanced Child Birth Simulator.
Click For Larger Photo
|
Palpation Module Simulator For Leopold Maneuvers
| $699.00 |
|
|
This unique Life-Size simulator design with Full-Term Fetal Baby and palpable: Fontanelles, Spine,
Shoulders, Elbows, Knees. This Fetal Baby can by placed in: normal, breech, or tranverse positions.
It is cradled between two "cushions" wich may be inflated independently of each other - inflation of
the lower cushion raised the fetus to the desired position: inflation of the upper "cushion" creates
a firm abdomen as in the nith month of pregnancy.
|
Leopold Maneuvers Features
- Full-term fetal baby with palpable fontanelles, spine, shoulders, elbows, and knees
- Fetal baby may be placed in normal, breech, or transverse position
- Fetal baby cradled between two "cushions"
- Cushions may be inflated independently of each other; inflation of the lower cushion raises the fetus to desired position; inflation of the upper cushion creates a firm abdomen as in the ninth month of pregnancy
- Module fits in GR-S500 Maternal and Neonatal Birthing Noelle Simulator
Includes:
- Fetal baby
- Upper and lower cushions that cradle baby
- Inflation devices
Weight 4 lbs.
|
|
|
See Complete Set Larger View
More Larger View Placenta & Baby |
Labor/Birth Training Simulator
Set Of 5 Parts
| $399.00 |
|
|
Each Model/Simulator in this set of 5 Labor/Birth Training Simulator, is essential for a comprehensive childbirth
Education Program. The Perineal Cloth can be used to demonstrate the stretching of the Perineum, possible Episiotomy, and
the emergence of the Fetal Head. It attaches securely to the Cloth Pelvic Simulator
Simulator with elastic
straps and accommodates the Fetal Simulator's Head. The Anatomically correct
Pelvic Simulator also accommodates the
Fetal Simulator's Head and measures 7.1/2" x 10" x 9.1/2". The Placenta/Cord/Amnion/Charion Simulator allows you to show
the Fetal Simulator inside the Sac. The snap-on Cord clearly reveals the Vein and Arteries, and convenient Drawstring closes
the Sac. The Amniotic and Chronic Membranes are accurately detailed in two colors. The Placenta measures 7" x 8". The 19"
long Fetal Simulator represents an average-size, full-term Baby. Made of soft yet durable realistic-like materials,
the Body flexes to show all representations and positions.
|
PLACENTA CORD / AMNION & CHORION MODELS
The amniotic membrane allows you to show the fetal model inside the sac. The Snap-On cord clearly shows the vein and
arteries, and a convenient drawstring closes the sac. Both amniotic and chronic membranes are detailed accurately in
two colors. Placenta is 7" x 8".
FETAL MODEL
Simulating an average full-term baby, this model's soft yet durable cloth body is flexible to show all presentations
and positions. 19" long.
PERINEAL CLOTH MODEL
Educators can use this cloth to demonstrate the stretching of the perineum, possible episiotomy, and the emergence of the fetal head. It
attaches securely to cloth or vinyl pelvic models with elastic straps. Accommodates our Fetal Model's head.
PELVIC MODEL
Accurate and anatomically correct, this instructional model can be used with the Perennial Cloth and accommodates our
Cloth Fetal Model's head. Model measures 10" x 10" x 7".
|
|
|
Click For Larger Photo |
Uterus And Fetus Model Set Of
5
| $499.00 |
|
|
These highly detailed , lifelike, colored Uterus
& Fetus Development models, consists of five individual
flexible lifelike uteruses with fetuses. Models illustrate fetal
development and the changes in the uterus at 6 weeks, 8 weeks,
15 weeks, 20 weeks, and 40 weeks. Made of Bio like TM material.
This model used in medical schools in student's educational
programs. Midwife schools , in doctor's offices for patient's
presentations and for legal presentations.
|
Sizes:
|
40 Weeks
20 Weeks
15 Weeks
8 Weeks
6 Weeks
|
12 x 8 x 5
9 x 6 x 3
7 x 5 x 3
7 X 3 X 2
4 X 4 X 3
|
|
|
Click For Larger view |
Cervix Vaginal Dilation
Module
-
Assessing Cervical Dilation
| $459.00 |
|
|
Cervix Vaginal Dilation Modules can be Inserted
into the Advanced Childbirth Simulator. Five Labor
Stations, Selected to represent conditions of the Cervix and Vagina
prior to labor, during labor, and at birth in a Primigravid Woman Stations
may be placed in Birth Canal of Advanced Childbirth Simulator. Five
Labor Stations, Selected to represent conditions of the Cervix and
Vagina prior to labor, during labor, and at Birth in a Primigravid Woman Stations
may be placed in Birth Canal of Advanced Childbirth Simulator.
Stations illustrated are: STA -5 prior to onset of
labor; STA -4 cervix Partially Effaced; STA -3 cervix Fully Effaced;
STA 0 fetal head at plane of ischial spine: STA +2 Cervix Nearing
Full; dilation; STA +5 crowning of Fetal Head Labor Delivery
Module Labor Delivery Module is designed to be used as a series of
models that can be: Passed around a classroom to compare the
condition of Cervix as Labor Progress.
Can be used with:
Advanced Child Birth Simulator
|
Stations illustrated are:
- STA -5 prior to onset of labor
- STA -4 cervix partially effaced
- STA -3 cervix fully effaced
- STA 0 fetal head at plane of ischial spine
- STA +2 cervix nearing full dilation
- STA +5 crowning of fetal head
FEATURES:
- Five Labor Stations
- Carrying Bag
|
|
|
Click For Larger Photo |
Pregnancy Pelvis, 2-part
Deluxe
| $539.00 |
|
|
This is an excellent Pregnancy model, life-size, median section through Female Pelvis during the 40th week of pregnancy with a removable fetus to study normal position of child before birth. Highly detailed color painted, anatomically correct. Popular model for study and medical programs in schools. Used
by students to easily understand functions of Female Reproductive
Organs, Urinary System, Pelvic Anatomy. Also used in Doctor's
Offices, Medical Schools, Legal Presentations.
Model Size: 18" x 17" x 15"
|
|
Click For Larger Photo
|
Fetal Monitoring And Labor
Progress
| $799.00 |
|
|
This versatile model provides a lifelike
simulation for performance of vaginal examinations, application
of the fetal spiral electrode and intrauterine pressure
catheter, assessing dilation, palpating fetal fontanelles and
suture lines, and assessing position of the vertex. This
three-dimensional model includes the fetal head, lower uterine
segment, and cervix made from lifelike materials. The fetal
model is encased in a durable plastic case which allows for easy
visualization of parts. The fetal head can also be removed to
practice fetal spiral electrode application while visualizing
the procedure. All parts are easily removed for washing. A
practice/resource guide is included with directions for use.
Comes with carrying case.
|
|
Click For Larger View
Fetal Head View
|
Cervical
Gynecology Examination Model
| Cervical
Examination $899.00 |
|
|
Optional
Fetus Head $99.00
|
|
|
Made of soft pliable plastic, this simulator
consists of a life-like replica of external Female
Genitalia, includes a seplus a set
of six interchangeable Cervical inserts. It is designed for
student practice in gauging Cervical dilatation and effacement
stages prior to childbirth. The following stages are included: 2cm
dilatation with 50% effacement; and 2cm, 5cm, 7cm, and 9cm
dilatation with full effacement. Because of the lifelike nature of
the materials used, the model should be treated with the care
accorded to a real subject. Cervical Simulator Complete with illustrated
instructions and plastic carry/storage case. Option Can be added:
Optional:
Fetus Head.
|
Accessories :
- Set of six interchangeable cervical inserts
- 2cm dilatation with 50% effacement
- 2cm, 5cm, 7cm, and 9cm dilatation with full
effacement.
- Illustrated instructions and plastic carry/storage
case.
- Optional - Fetus Head
|
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}