State of The Art Childbirth Simulator Simulate High Stress Situations with the  Childbirth Birthing Simulator! 2011 Received EU Robotics Technology Transfer Award
Using patented haptic response technology, Simulator gives you a unique training experience. The level of realism is additionally heightened through a specially developed visual and audio interface.
The monitoring software provides information on the progress of the birth and allows training in intervention both through the use of medication and the use of vacuum or forceps to complete a delivery. The force feedback mechanism allows the trainee to learn the haptic skills necessary to give confidence when performing these procedures.
The Birth simulator, is a model of a female abdomen with a vulva and the spina ischiadica as landmarks.  Inside the simulator is a fetal head with the sagittal suture and fontanelle for determining the position and approach of the head.  The 19" flat screen monitor with an easy to use Touch Screen, displays an exact image of the position and rotation of the fetal head within the maternal pelvis.  A variety of delivery scenarios are presented in the application software for model based training.  The cardiotocograph and partogram support the assessment and progress of the delivery scenario.  The administration of medication or amniotomy are interventions that may be used in order to achieve the necessary progress during the delivery. 
In addition to learning the necessary haptic skills, Child Birth Simulator provide opportunity to practice an instrumental delivery in a realistic manner - over and over again with little or no set up time! In fact it takes less than 60 seconds to commence a new birthing scenario.  See More Photos on left.
Child Birth Birthing Simulator trains the students in:

Advanced Gynecological & Obstetric  Simulator Features: Rotation of the Fetus at the time of Delivery can be confirmed by means of 3-Dimensional Animation. The Virtual Reality Vaginal Exam Model makes it possible to see images of the actual movements of the fingers inside the vagina when practicing vaginal exams, something that has not been possible to date. Instructors can now show trainees specifically how the two fingers should be moved when performing the exam, and can check that the trainee is moving their fingers properly.

• Sensors attached to the fingers enable measurement and display of distances between the two fingers and the distances moved by the fingers.

• Rotation of the fetus at the time of delivery can be confirmed by means of 3-dimensional animation.

• A line connecting the ischial spines (zero station) can be displayed

• The material used for the model closely approximates the characteristics of living body. The cervix and other structures can be comfirmed with a very real feel.

• Three-dimensional images can be freely moved on the computer, enabling checking in any direction

• Bishop scores from late-stage pregnancy to the beginning of labor (cervical dilation, effacement, consistency and position) can be confirmed

• Three models with varying degrees of uterine opening dilation are provided, along with a model of the fetal head. These can be interchanged and the degree of engagement can be adjusted, allowing the progression of labor to be gauged by means of vaginal exam

• The Fetal head model can be used to gauge rotation of the head of the fetus, by varying the positions of sagittal sutures and the posterior fontanel.

• Simulator Extra Features :  Rotation of the fetus during delivery can be confirmed using 3-dimensional animation. Visualization using the actual model used for vaginal exam practice. Use of 3-dimensional sensors allows confirmation of actual finger movements on the images.

• Displays of the fetus, pelvis, uterus, fingers, and station line can be turned on and off individually.

• The image of the fetus on the screen can be viewed from any of eight different directions. Orientation of the fetus on the screen can be selected to match the actual-model fetus. The positional relationship of the fingers and fetus on the screen matches that of the actual vaginal exam being performed. (*Selection of the actual uterus model. This is valid only when using the 8~9 cm uterine dilation model or the fetal head.)

Measurement between two fingers: This measures the distance between the two fingers to which the sensors have been attached. The distance between two points is measured in centimeters, and is displayed to one decimal place.
Single-finger movement distance: This measures the distance that one of the two sensor-tracked fingers moves. Each time a measurement is made, the result is displayed on the screen as a cumulative display.

Asessories :	Quantity
Main body	1
Vulva for vaginal exam	1
Exclusive screws	2
Base for securing main body	1
Finger sensor for index finger (*1)	1
Finger sensor for second finger (*1)	1
trakSTAR (*2)	1
USB cable	1
Power cable	1
1~2 cm uterine dilation model	1
3~4 cm uterine dilation model	1

Asessories:	Quantity
8~9 cm uterine dilation model	1
Fetal Head model	1
Base for uterine dilation model	1
Baby powder	1
Glycerine	1
Gloves	3 pairs
Product key	1
trakSTAR installation CD	1
Product CD	1
Plastic wagon	1
Cloth cover	1

*1 Finger sensors are available in three finger sizes: S, M and L.
Please specify the size when purchasing the Virtual Reality Vaginal Exam Model.

Specifications:	Size	Weight
Main body	Approx. 51 (L) × 28 (W) × 31 (H) cm	Approx. 2.5 (kg)
Vulva for vaginal exam	Approx. 18 (L) × 19 (W) × 17 (H) cm	Approx. 0.9 (kg)
Base for securing main body	Approx. 24 (L) × 44 (W) × 5 (H) cm	Approx. 5.2 (kg)
trakSTAR	Approx. 19 (L) × 29 (W) × 7 (H) cm	Approx. 1.3 (kg)
Plastic wagon	Approx. 56 (L) × 39 (W) × 82 (H) cm	Approx. 7.7 (kg)

 

Item	Power supply	Operable temperature range	Usage environment
trakSTAR	100 to 240 V, 50/60 Hz	5 to 40 ℃	Magnetic objects or stray magnetic fields within the operable range of the simulator may adversely affect performance.

Operating Requirements:

OS		Windows XP (Service Pack 2) / Vista (32-bit version)
CPU		Pentium 4 (1 GHz or more recommended) or later processor
Memory		512 MB (1 GB or more recommended)
Graphics card	Desktop	GeForce4 or higher recommended
	Note	GMA X3100 (Intel GL960, GM965, etc.) or higher recommended

* 2 USB ports (These are used via a trakSTAR and product key connection when operating the model)

                                      

Allow 30 days production - completion time before shipping

One of our most popular Gynecological Simulator! The Full -Size Female adult lower body gives students and educators a graphic experience in vaginal speculum examination, bi-manual pelvic examination, IUD insertion techniques, diaphragm sizing and fitting, uterine sounding, and viewing of normal and abnormal cervices.

This one unique Gynecological Examination Simulator Model is realistically sculptured, anatomically correct and accurate. Designed by physicians for physicians and Healthcare providers. Simulator represents a Female adult lower body with relevant internal anatomical landmarks and anatomically accurate Fimbriae and Ovaries. The Gynecologic Examination Simulator combines and delivers the ability to demonstrate multiple gynecologic procedures as well as: practice Laparoscopic Examination and Minilaparotomy as well as recognition of pathologies and placing of contraceptive devices can be trained:

The most realistic Hysteroscopy Simulator available! A full size female adult lower torso with a foam-backed soft outer skin simulates the feel of the anterior pelvic wall.

A lifelike Gynecological Manikin- Simulator, Female Pelvis for developing diagnostic skills in gynecologic procedures, anatomical instruction, abdominal palpation, and speculum instruction. Gynecological Manikin allows: the comprehensive, stress free Introduction of Gynecological Examinations, or more Advanced Tactile Comparisons of Pelvic Pathologic Conditions in a Classroom Setting easing the way into Clinical Experience. Constructed of soft, easily cleaned, vinyl materials that approximate skin texture, provides detailed, life-like Anatomical Features and references. Included are the following interchangeable inserts: normal cervix for IUD insertion and removal, normal parous cervix, cervix with endocervical polyp, cervix with ectropian characteristics, cervix with neoplasia (carcinoma), normal uterus for IUD insertion and removal, pregnant 10-week uterus, and two adnexal masses. Does not include ovaries. Manikin comes with instruction sheet and soft nylon bag.

This Noelle Simulator - complete Childbirth Simulators have been part of Maternal and Child health programs for more than 40 years. This comprehensive teaching system combines the best of our patient care simulators with the Advanced Childbirth Simulator. It is designed to provide a complete birthing experience before, during, and after delivery. Resuscitation baby has intubatable airway and patent umbilical vein Three Vulval inserts for postpartum suturing training. Extensible dilating cervix permits students to conduct vaginal exams and record results.

This Childbirth Simulator Model is an excellent training model for medical students to build confidence in and practice in Childbirth. This versatile Childbirth Simulator is used worldwide by Healthcare Educators. It not only provides an excellent simulation of the Normal Delivery Experience for the student and educator, but also provides Instruction in Abnormal and Multiple Deliveries. Used in Medical Schools and Doctor Offices, Legal Presentations.  Cervix Vaginal Dilation Modules (sold as optional) can be Inserted into the Advanced Childbirth Simulator.  Five Labor Stations, Selected to represent conditions of the Cervix and Vagina prior to labor, during labor, and at Birth in a Primigravid Woman Stations may be placed in Birth Canal of Advanced Childbirth Simulator. Stations illustrated are: STA -5 prior to onset of labor; STA -4 cervix Partially Effaced; STA -3 cervix Fully Effaced; STA 0 fetal head at plane of ischial spine: STA +2 Cervix Nearing Full; dilation; STA +5 crowning of Fetal Head Labor Delivery Module is designed to be used as a series of models that can be: a) Passed around a classroom to compare the condition  of Cervix as labor progress.

Cervix Vaginal Dilation Modules can be Inserted into the Advanced Childbirth Simulator.  Five Labor Stations, Selected to represent conditions of the Cervix and Vagina prior to labor, during labor, and at birth in a Primigravid Woman Stations may be placed in Birth Canal of Advanced Childbirth Simulator. Five Labor Stations, Selected to represent conditions of the Cervix and Vagina prior to labor, during labor, and at Birth in a Primigravid Woman Stations may be placed in Birth Canal of Advanced Childbirth Simulator. Stations illustrated are: STA -5 prior to onset of labor; STA -4 cervix Partially Effaced; STA -3 cervix Fully Effaced; STA 0 fetal head at plane of ischial spine: STA +2 Cervix Nearing Full; dilation; STA +5 crowning of Fetal Head Labor Delivery Module Labor Delivery Module is designed to be used as a series of models that can be:  Passed around a classroom to compare the condition  of Cervix as Labor Progress. Can be used with: Advanced Child Birth Simulator

For realistic practice of delivery techniques this Anatomically Correct Pelvic Model Simulator with full term newborn and placenta to give your trainees realistic practice in multiple techniques, and to learn the procedure for emergency childbirth. It comes with: disposable umbilical cords, clamps, easily replaceable spare vulva, powder to make simulated blood, a modular pregnant belly overlay, and a clear abdominal overlay. The modular overlay has a self-contained fetus for practicing the Leopold’s maneuver. The lifelike pelvic cavity has pronounced pelvic landmarks. Included are: spinal column, angled birth canal, ileum, ischium, sacrum, sacro spinious ligaments, and greater sciatic notch. The fetus provided is of a realistic newborn size with fontanels and cranial sutures.   This Obstetric Simulator/Manikin with Fetus and Placenta to give students experience with multiple techniques and procedures for Childbirth. Includes disposable Umbilical Cord with Clamps, extra Vulva, Pregnant Belly overlay, clear Abdominal Overlay, simulated Blood Powder, and a Carry Bag. Latex Free

A perfect anatomical Childbirth Model Model and birthing Simulator to teach and practice diagnostic and therapeutic manipulation before and during Childbirth. This Human Childbirth Model features a Female Pelvis with covered belly cavity, removable vulva and a fetus. An anatomical accurate and realistic model of human birth. Birthing simulator delivered on baseboard. Size: 12 x 22 x 22in , Weight: 14Lb.

This 3D Model allows advantage in teaching Health Professionals and Students is the ability to:  Perform Leopold's Maneuvers and provide immediate visualization of the fetus after demonstration of the Palpation Skills. This unique three-dimensional model is used to demonstrate Palpation of the Abdomen to determine Fetal Lie, Presentation, and Position. The model includes a Fetus with a weighted body, movable arms and legs, firm buttocks, and a head with palpable anterior and posterior fontanels. The Fetal Body flexes to let you demonstrate all presentations and positions. The Fetus and vinyl pelvis rest within the abdominal portion of the model. The abdomen, a padded cloth attached by Velcro to the base, allows easy removal and replacement in order to visualize and change fetal positions. Movable gel packs are included to simulate amniotic fluid. A practice/resource guide is included to provide detailed suggestions on how to use this model with nurses, nurse-midwives, healthcare providers, students, and expectant parents.  Size: 20" x 12" x 10"

This unique Life-Size simulator design with Full-Term Fetal Baby and palpable: Fontanelles, Spine, Shoulders, Elbows, Knees. This Fetal Baby can by placed in: normal, breech, or tranverse positions. It is cradled between two "cushions" wich may be inflated independently of each other - inflation of the lower cushion raised the fetus to the desired position: inflation of the upper "cushion" creates a firm abdomen as in the nith month of pregnancy.

Made of soft pliable plastic, this simulator consists of a life-like replica of   external Female Genitalia, includes a seplus a set of six interchangeable Cervical inserts. It is designed for student practice in gauging Cervical dilatation and effacement stages prior to childbirth. The following stages are included: 2cm dilatation with 50% effacement; and 2cm, 5cm, 7cm, and 9cm dilatation with full effacement. Because of the lifelike nature of the materials used, the model should be treated with the care accorded to a real subject. Cervical Simulator Complete with illustrated instructions and plastic carry/storage case. Option Can be added: Optional: Fetus Head.