Direct Feed Humidifier Industrial Misting Fogging Hanging System
Direct Feed Humidifier Misting Fogging System 5 GPH. 115V. 60Hz. 1 Ph
Buyamag INC
Humidistat Air Humidity Automatic Control
$259.99
Cycle Timer Automatic Control
$319.00
Thermostat Automatic Control
$269.50
24 Hour Timer Automatic Control
$189.50
Water Solenoid Automatic Control
$189.00
Humidity Meter & Dew Point
$199.00
Humidity & Temperature Meter
$159.00
Direct feed industrial humidifier fogging system is our smallest, simplest fog fan. This unit is easy to install, dependable, and low in cost, so it is ideal for humidification and evaporative cooling in smaller settings. This centrifugal atomizer has a rear-feed blade system that quietly produces billions of tiny, fog-like particles that evaporate quickly. Units hang by either a single U-bolt or a universal mounting bolt. The housing pivots easily by hand.
Each unit comes with a 14 feet power cord with plug, 20 feet of water line, 12 feet of drain line, and a visual flow meter control panel. Components are UV stabilized for greenhouse or outdoor use. All control packages for the Direct Feed include a water solenoid to control both power and water supplies.
Quiet Operation, Easy Pivot Fogging Head, Nozzle-Free Atomization, Up to 5 GPH, Stainless Steel Components, Garden Hose Connect.
Include: Direct Feed unit comes with a flow-meter panel. This panel controls the water flow rate and fogging output. It features stainless steel construction and a clear polycarbonate flow rate scale for monitoring. Flow-meters require a water supply of 10 to 100 PSI. Arrives safely packaged, impact protected and fully assembled. Ready for use.
Fasco Motor: Industrial Grade total enclosed For extended life in use around water, Stainless Steel Shaft
Specifications:
Dimensions:
17 x 12 x 16in.
Approximate Weight:
Fogging Capacity: 10 lbs
Up to 5 GPH. gal per/hr.
Approximate Shipping Weight: 28 lbs
Power Motor : 115v. 0.5a. 1/20hp. 60Hz.
Noise @ 10 ft distance:
10 feet - 63 dB(A)
Average Particle Size:
low volume
40 microns
Shipping Box size: 19in. 19in. 19in.
CFM: 980
Hardware: 304 (18/8) Series stainless steel
Environment:
Endures temperatures from
33F to 160 F
Indoors / outdoors
Humidity to 85% RH
UV stabilized & impact resistant
Extra Automatic controls optional - select when ordering bellow
Humidistat Humidity Automatic Control
This pre-wired humidistat is an ideal means of control for applications requiring 80% or less relative humidity. It incorporates a fast-acting sensing element with a simple control dial. Includes piggy-back plug.
Cycle Timer Automatic Control
Want to maintain high humidity above 80%? Then this pre-wired time-cycle control is what you may need. Select time cycles ranging from 30 seconds to 4 hours. Water-tight Nema 4X, Includes 115V piggy-back plug
Thermostat Automatic Control
If your primary interest is indoor evaporative cooling, then this pre-wired control is what you need to automate your unit. Water-tight Nema 4X, Control range 40-110º F, Differential 2º F, Includes 115V piggy-back plug
24 Hour Timer Automatic Control
For automating on/off cycles. This reliable mechanical timer turns power on and off at selected intervals. Ideal for dawn-to-dusk type applications. Rain-tight enclosure, 115V - 15A receptacle. Two sets of on/off trippers provided, Minimum 30 minute intervals
Water Solenoid Automatic Control
Control water flow, electrically. Use with preexisting control systems. Connect directly to the same power supply to automate water flow (on/off) in conjunction with the fan. Safeguard against power outage. If operating fogging units manually (no control system), a water solenoid installed in the units water supply line will shut off water flow in the event of a power outage. 10? power cord with plug, 115V, NEMA 4 Water-tight components, ¼? OD tubing connections
Humidity Meter & Dew Point
Ideal for applications up to 100% Relative Humidity. This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in F or C. Temperature range/accuracy: -4 to 122F (-20 to 50C)/1.8F (1C), Humidity range/accuracy: 0 to 100%RH /3% , Response time: 60 seconds, Power source: Two "AAA" batteries (included).
Humidity & Temperature Meter
This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in F or C, Temperature range/accuracy: 32 to 122F (0 to 50C)/1.8F (1C) ,Humidity range/accuracy: 20 to 95%RH /3%, Response time: 60 seconds, Power source: CR2032 Lithium-ion battery (included)
